Bosch Cet3 10 Gallon Angled Compressor

Bosch Cet3 10 Gallon Angled Compressor Includes 3-Gallon Angled Tank 1 HP Mini Twin Compressor – CET3-10-RT The Bosch CET3-10 Three-Gallon, One-HP Mini Twin-Angled Tank Air Compressor is portable sufficient to move from web site to site, simple to operate and maintain, and tough sufficient to withstand heavy-duty conditions. It’s likewise CSA-certified, easy to store, and great for a range of carpentry, framing, roofing, and rebuilding jobs. The CET3-10 Three-Gallon, One-HP Mini Twin-Angled Tank Air Compressor offers: Angled “EZ Drain” scheme for effortless draining. Four-pole induction motor for powerful performance. A recessed control panel provides long-term shelter from the elements. View larger. Vertically angled tanks concede for easy draining and remainder the compressor for portability. Vertically Angled Tanks for Your Comfort Other air compressors may cause uncomfortableness because they lack balance, and their exposed motor and elements make them difficult to carry. But the CET3-10 is comfortable to use, because it features vertically angled tanks that are ergonomically balanced. And because this compressor stays close to your body, it provides a natural center of gravity. Additionally, the roll cage and recessed, easy-access control panel protect you from exposure to the regulator, gauges, coupler, and drain valve. Compact Size for Enhanced Portability Unlike huge wheeled compressors that hold the majority of their weight in front, the CET3-10 is balanced, measuring 17.0 x 16.25 x 16.0 inches (WxHxL) and weighing 57.3 pounds. It’s compact, lightweight, and even sufficient for effortless motion around the jobsite. EZ Drain System for Fast, Efficient Draining To ascertain that the tanks drain properly, and to prevent a decrease in compression that may cause a decrease in productivity and performance, the CET3-10 boasts Bosch’s “EZ Drain” system. First, the tanks are somewhat angled to concede water to gather at their bottoms. Second, the drain scheme is connected to both tanks to concede for having little impact draining. Finally, with pressure in the tanks, you may simultaneously drain them both by turning the ball valve located in the control panel. Recessed Control Panel and Roll Cage Protect Components from Damage Many air compressors have exposed elements that are unprotected from harsh jobsite conditions–but not the CET3-10. This compressor has a recessed control panel that wholly protects the regulator, gauges, coupler, and drain valve. Additionally, a roll cage shields the pump, motor, tanks, safety-relief valve, and all internal components. The result is less downtime and more productivity. Safety-Relief Valve, Air Filter, and Dipstick for Additional Protection In addition to it is protective design, the CET3-10 features a safety-relief valve to prevent failures by relieving pressure from the scheme when compressed air reaches a predetermined level. And to prevent dirt and debris from compromising performance or durability, an air filter cleans the air coming into the pump. Additionally, an oil dipstick lets you recognise precisely how much oil is left in the tank, so it’s always clear when it’s time to refuel. Powerful and Quiet Induction Motor The CET3-10 owes it is robust performance to a four-pole induction motor, which provides a dBa of 72 for quiet operation, keeping you free of distraction when you’re working close to the compressor. Additionally, a contractor-grade, oil-lubed pump ensures durability and extends tool life. The CET3-10 comes with an industry-leading, two-year pump warranty. Straightforward, User-Friendly Operation The CET3-10 has an easy-to-read tank pressure gauge that lets you recognise the amount of pressure available, as well as a regulator that allows you to effortlessly set the right level for driving nails. Additionally, two couplers are located on the tool’s front for fast, uncomplicated hose attachment. For added convenience, the CET3-10 requires just 14 seconds of recovery time. What’s in the Box Compressor with oil in the pump. SN350-20F Full Head Framing Nailer SN350-34C Clipped Head Framing Nailer FNA250-15 15 Gauge Angled Finish Nailer FNS250-16 16 Gauge Angled Finish Nailer BNS200-18 18 Gauge Brad Nailer STN150-18 18 Gauge Narrow Crown Stapler RN175 Coil Roofing Nailer CGT8-65W 8 Gallon 6.5 HP Gas Wheelbarrow Air Compressor CET8-15W 8 Gallon 1.5 HP Electric Wheelbarrow Air Compressor CET3-10 3 Gallon Electric Hand Carry Compressor CET4-20 4 Gallon Electric Hand Carry Compressor CET4-20W 4 Gallon Electric Compressor w/ Wheels New Bosch Compressors feature easy to use operation and maintenance, lasting constituents to withstand any jobsite or condition, and a superior design perfective for transport around a rugged jobsite.

Bosch Cet3 10 Gallon Angled Compressor Image

Bosch Cet3 10 Gallon Angled Compressor Photo

Bosch Cet3 10 Gallon Angled Compressor Image

Bosch Cet3 10 Gallon Angled Compressor Picture

Most helpful client reviews

5 of 5 people found the following review helpful.
Bosch CET-3 review-mostly good/some not great
By funkguitar
I purchased this air compressor because mainly: it had a contractor grade pump, said it was well balanced for easy determining the direction of travelling of around the jobsite, oil-lube pump, 79dB (decibel) 3 gallon twin stack (vertically positioned) for more free air and 2.6 CFM.

4 of 4 people found the following review helpful.
Awesome air!
By Drew Stephen
I purchased this to replace my old dewalt air compressor and I could not have gotten a better replacement. After bolting on the wheels and 20 minute break in amount of time your in buisness. This compressor pumps up and recovers very fast. I like the center drain valve as it makes draining the tanks a walk in the park. The pneumatic wheels make moving this compressor around the jobiste a breeze. If your looking for a mobile compressor that recovers fast this the compressor for you!

2 of 2 people found the following review helpful.
Well worth the price
By Jesse Dover
Being a carpenter in the north east I require a pretty heavy responsibility compressor that is low maintenance and may begin up all year round. I shopped around before going with the Bosch, and it unquestionably lives up to expectations. I had already purchased a new Bosch (FNA250) angled finish nailer and was very impressed with their new technology, fundamentally lighter and smaller, with more power. This compressor stood out from the other twin tank models for assorted reasons but primarily because of it’s mobility and good strong design.

I like the fold down handle for storage, it fits right underneath my work bench no problem. And when extended you may wheel it around without bending over, not similar to the Dewalt and Makita model. The wheels are pneumatic and high quality, and grant it to go right up stairs. Also it has two intelligently placed handles at the bottom of the two tanks and one on top for one and two man operations. Overall it is comparatively light for it is size, but I closely have never had to muscle it around because I favor the wheels. My other compressor (Hitachi EC12) hasn’t left the garage since I purchased this one.

This compressor ought to have been designed by somebody who uses one daily. The whole compressor is surrounded by a sturdy roll cage. All the air fittings and gauges are recessed amid the tanks which protect them from being damaged. The air release valve is conveniently located amongst the tanks at the bottom of the unit for effective water and air draining. I did have to modify the couplings because the ones that come with it weren’t compatible with all my other hoses, only took 10 mins. Also on my other compressor I had mounted a water filter right after the pressure regulator, but there isn’t any room to do the same on this model. I am going to have to put it “in line” after the couplings somehow.

Another nice feature is the slow begin motor, which draws less amps upon commence up, so your not always tripping weak breakers. The power cord is very heavy obligation and good quality, looks like it is 10 gauge. Also the recovery time is amazing, this motor is a workhorse, and fills the two tanks to 125 psi very fast for being 2 HP. It is not the quietest compressor, but because it recovers so speedily (appx 10 sec) it doesn’t run that much.

Overall it is an pricey compressor, but well worth it because they didn’t sacrifice quality in it’s design . You actually get what you pay for, so you might as well compensate an extra $150 for something that won’t kill your back, and is REALLY WELL MADE. Mine has already salaried for itself and some.

See all 7 client reviews…